First value: a west workspace, not a blank editor.

Before you start

You need a working Zephyr command-line environment (west, toolchain, and a board you can flash). Confirm Zephyr’s blinky runs on your hardware first — then install Infuse-SDK as its own workspace.

Supported silicon today: Nordic nRF52, Nordic nRF53, Nordic nRF91, Nordic nRF54L, STMicroelectronics STM32L4x. Need a chipset we don’t list? Talk to us .

Install Infuse-SDK

Do not git clone the repo and run west update in place. Use west init so the Infuse manifest pulls Zephyr and the rest of the workspace.

mkdir ~/infuse
cd ~/infuse
west init -m https://github.com/Embeint/infuse-sdk.git
west update
pip install -U -r ~/infuse/infuse-sdk/scripts/requirements.txt

Windows: use %USERPROFILE%\infuse instead of ~/infuse. A different folder is fine if you update the paths.

Then build a sample

Board-specific build and flash steps live in the docs — they change with Zephyr and board targets. Follow Embedded Getting Started (opens in a new tab) next.